Allied Telesis AT-S62 - Manual (Page 106)

Chapter 7: SNMPv3 Commands
106
CLEAR SNMPV3 NOTIFY
Syntax
clear snmpv3 notify=notify tag
Parameters
notify Specifies the name of an SNMPv3 Notify Table entry,
up to 32 alphanumeric characters.
tag Specifies the notify tag name, up to 32
alphanumeric characters.
Description
This command clears the value of the tag parameter in an SNMPv3
Notify Table entry.
Examples
The following command deletes the value of the tag parameter in an
SNMPv3 Notify Table entry called “hwengtrap.”
clear snmpv3 notify=hwengtraptag tag
The following command deletes the value of the tag parameter in an
SNMPv3 Notify Table entry called “hwenginformtag.”
clear snmpv3 notify=hwenginform tag