Allied Telesis AT-S62 - Manual (Page 456)

Chapter 29: GARP VLAN Registration Protocol Commands
456
SHOW GARP
Syntax
show garp=gvrp
Parameter
garp Specifies the GARP application you want to display.
The only GARP application supported by AT-S62
management software is GVRP.
Note
The online help for this command contains an STP option. The
option is not supported.
Description
This command displays current values for the following GARP
application parameters:
❑ GARP application protocol
❑ GVRP status
❑ GVRP GIP status
❑ GVRP Join Time
❑ GVRP Leave Time
❑ GVRP Leaveall Time
❑ Port Modes
Example
The following command displays the above GVRP information:
show garp=gvrp