Allied Telesis AT-S62 - Manual (Page 485)

AT-S62 Command Line User’s Guide
485
authentication messages
between the client and the
authentication server. Each
client that attempts to
access the network is
uniquely identified by the
switch by using the client's
MAC address. This is the
default setting.
authorised Disables 802.1X port-based
forceauthenticate authentication and causes
the port to transition to the
authorized state without any
authentication exchange
required. The port transmits
and receives normal traffic
without 802.1X-based
authentication of the client.
The parameters are
equivalent.
unauthorised Causes the port to remain in
forceunauthenticate the unauthorized state,
ignoring all attempts by the
client to authenticate. The
switch cannot provide
authentication services to
the client through the
interface. The parameters
are equivalent.
quietperiod Sets the number of seconds that the switch remains in
the quiet state following a failed authentication
exchange with the clien
t. The default value is 60
seconds. The range is 0 to 65,535 seconds.
reauthenabled Controls whether the client must periodically
reauthenticate. Options are:
enabled Specifies that the client must
periodically reauthenticate.
This is the default setting.
The time period between
reauthentications is set with
the reauthperiod parameter.