Allied Telesis AT-S62 - Manual (Page 117)

AT-S62 Command Line User’s Guide
117
Examples
In the following command, the SNMPv3 Notify Table entry is called
“testengtrap1” and the notify tag is “testengtag1.” The message type is
defined as a trap message and the storage type for this entry is
nonvolatile storage.
create snmpv3 notify=testengtrap1 tag=testengtag1
type=trap storagetype=nonvolatile
In the following command, the SNMPv3 Notify Table entry is called
“testenginform5” and the notify tag is “testenginformtag5.” The
message type is defined as an inform message and the storage type for
this entry is nonvolatile storage.
create snmpv3 notify=testenginform5
tag=testenginformtag5 type=inform
storagetype=nonvolatile