Allied Telesis AT-S62 - Manual (Page 246)

Chapter 16: File Download and Upload Commands
246
UPLOAD METHOD=LOCAL
Syntax
upload method=local destfile=filename
srcfile|file=appblock
Parameters
method Specifies a local upload.
destfile Specifies a filename for the AT-S62 image file. If the
name contains spaces, enclose the name in quotes.
srcfile or file Specifies the application block (APPBLOCK), where the
active AT-S62 image file is stored.
Description
This command copies the switch’s active AT-S62 image file from the
application block, where the active AT-S62 image is stored, into the
switch’s file system.
Note
It is unlikely you will ever need to perform this type of upload.
Note
Uploading the active AT-S62 image file into a switch’s file system
should be perform with care. The file will take up most of the 2
megabytes of space in the file system, leaving little room for other
files, such as configuration files and SSL certificates.
The DESTFILE parameter specifies a name for the file. This is the name
given to the AT-S62 image file when uploaded from the application
block to the file system. The name should include the suffix “.img”.
The equivalent SRCFILE and FILE parameters specify APPBLOCK, for
application block.
The optional VERBOSE parameter is only used with the REMOTESWITCH
upload. It is used to monitor the progress of the upload process.