Allied Telesis AT-S62 - Manual (Page 131)

AT-S62 Command Line User’s Guide
131
DESTROY SNMPv3 TARGETPARMS
Syntax
destroy snmpv3 targetparams=targetparams
Parameter
targetparams Specifies an SNMPv3 Target Parameters table entry.
Description
This command deletes an SNMPv3 Target Parameters Table entry. After
you delete an SNMPv3 Target Parameters Table entry, you cannot
recover it.
Examples
The following command deletes the SNMPv3 Target Parameters Table
entry called “targetparameter1.”
destroy snmpv3 targetparams=targetparameter1
The following command deletes the SNMPv3 Target Parameters Table
entry called “snmpmanager.”
destroy snmpv3 targetparams=snmpmanager