Allied Telesis AT-S62 - Manual (Page 494)

Chapter 32: 802.1x Port-based Access Control Commands
494
SHOW PORTACCESS|PORAUTH PORT
Syntax
show portaccess|portauth port=port
authenticator|supplicant config|status
Note
The PORTACCESS and PORTAUTH keywords are equivalent.
Parameters
port Specifies the port whose port-based access control
settings you want to view. You can specify more
than one port at a time.
authenticator Indicates that the port is an authenticator.
supplicant Indicates that the port is a supplicant.
config Displays the port-based access control settings for
the port.
status Displays the status and role of the port.
Description
Use this command to display information about authenticator and
supplicant ports.
Examples
The following displays the status for port 10, which has been set to the
authenticator role:
show portaccess port=10 authenticator status
This command displays the port access configuration of port 12 which is
a supplicant port:
show portaccess port=12 supplicant config