Allied Telesis AT-S62 - Manual (Page 461)

AT-S62 Command Line User’s Guide
461
SHOW GARP MACHINE
Syntax
show garp=gvrp machine
Parameter
garp Specifies the GARP application you want to display.
The only GARP application supported by AT-S62
management software is GVRP.
Description
This command displays the following parameters for the GID state
machines for the GARP application. The output is shown on a per-GID
index basis; each attribute is represented by a GID index within the GARP
application.
❑ VLAN
❑ Port
❑ App
❑ Reg
Example
The following command displays GID state machines:
show garp=gvrp machine