Set ip arp – Allied Telesis AT-S62 User Manual

Page 198

Text mode
Original mode

Chapter 11: Networking Stack Commands

198

SET IP ARP

Syntax

set ip arp [timeout=integer]

Parameter

timeout

The range is 1 to 260000 seconds. The default setting

is 400 seconds.

Description

This command prevents the table from becoming full with inactive
entries. It allows you to set the timer for removing temporary entries in
the ARP table. Inactive temporary entries in the ARP table are timed out
according to the ARP cache timeout value which is set with the timeout
option.

Example

The following command sets the timer to 600 seconds:

set ip arp timeout=600