Allied Telesis AT-S62 - Manual (Page 560)

Chapter 39: Management ACL Commands
560
SET MGMTACL
Syntax
set mgmtacl ipaddress=ipaddress mask=string
protocol=tcp interface=telnet|web|all
Parameters
ipaddress Specifies the IP address of the ACE to be modified.
mask Specifies the ACE’s mask.
protocol Specifies the ACE’s management protocol. This
parameter supports only one option:
tcp Transmission control protocol.
interface Specifies the new management method for the ACE.
The options are:
telnet Telnet management
web Web management.
all Both Telnet and web management.
Description
This command changes the management method of an existing
management access control entry in the Management ACL. For instance,
you might use this command to change an entry from Telnet
management only to both Telnet and web browser management.
You cannot change the IP address or subnet mask of an existing entry in
the table using this command. Changing these parameters requires
deleting the entry and reentering it with the necessary corrections.
Note
You must specify all the parameters when modifying the
management method of an ACE.