Allied Telesis AT-S101 - Manual (Page 39)

AT-S101 Management Software User’s Guide
39
Rebooting a Switch
This procedure reboots the switch and reloads the AT-S101 Management
Software from flash memory. You may want to reboot the device if you
believe it is experiencing a problem.
Caution
The switch does not forward network traffic during the reboot
process. Some network traffic may be lost.
To reboot a switch, perform the following procedure:
1. From the menu on the left side of the page, select the Tools folder.
The Tools folder expands.
2. From the Tools folder, select Reboot.
The Reboot Page is shown in Figure 12.
Figure 12. Reboot Page
3. For the Reboot Type, select Normal from the pull-down menu. This is
the default setting.