Allied Telesis AT-S101 - Manual (Page 21)

21
Chapter 2
Basic Switch Parameters
This chapter provides procedures to perform basic switch activities such
as reassigning the IP address, enabling the DHCP Client, configuring new
usernames and passwords, and rebooting the system.
This chapter contains the following sections:
ˆ “Configuring an IP Address, Subnet Mask and Gateway Address” on
page 22
ˆ “Setting Up the IP Access List” on page 24
ˆ “Enabling and Disabling the DHCP Client” on page 27
ˆ “Configuring System Management Information” on page 29
ˆ “Configuring System Administration Information” on page 31
ˆ “Setting the User Interface Configuration” on page 34
ˆ “Viewing System Information” on page 36
ˆ “Rebooting a Switch” on page 39
ˆ “Pinging a Remote System” on page 41
ˆ “Returning the AT-S101 Management Software to the Factory Default
Values” on page 44
Note
To save your changes, select Save Configuration to Flash from
the menu on the left side of the page.