Allied Telesis AT-S101 - Manual (Page 204)

Chapter 19: Access Control Policies
204
5. Enter a committed rate between 1 and 1,000 Megabits per second.
6. Enter a burst size which is the maximum amount of data, in bytes, that
the switch agrees to transfer during a specified time interval by enter a
value in the Burst Size field. Choose from the following values:
– 4K
– 8K
– 16K
– 32K
– 64K
7. To set an profile action ID, enter a value between 1 and 72 in the
Profile Action ID field that was configured on the Create Profile Page.
See “Creating Profile Action” on page 199.
8. Then click Apply to activate your changes.
The Out-profile Action table is updated.
9. From the menu on the left side of the page, select Save
Configuration to Flash to save your changes.