Allied Telesis AT-S101 - Manual (Page 193)

AT-S101 Management Software Features Guide
193
3. Input the following fields:
Classifier Index
Indicates the identification number of the classifier. You must assign
each classifier a unique index.
Source MAC Address
Indicates the source MAC address of the classifier.
Source MAC Mask Length
Indicates the source MAC mask length of the classifier.
Destination MAC Address
Indicates the destination MAC address of the classifier.
Destination MAC Mask Length
Indicates the destination MAC mask length of the classifier.
VLAN ID
Specifies the VLAN ID of the VLAN to which the frame belongs. Each
classifier can contain only one VLAN ID. To create a policy that applies
to several different VLAN IDs, you must define multiple classifiers.
802.1p Priority
Specify the 802.1p priority level. Enter a value between 0 and 7 with 0
as the lowest priority level and 7 as the highest priority level.
Ether Type
Specify an Ethernet frame for filtering. For example, to filter an ARP
packet, type” 0806.”
DSCP
Indicates the Differentiated Services Code Point (DSCP) tag which
specifies which class of service packets belong to. Specify a value
between 0 to 63. For more information, see “DSCP (DiffServ Code
Point)” on page 189.
Protocol
Specify a protocol to filter by the protocol field in the IP header. See
“Protocol” on page 189 for more information.
Source IP Address
Specify the source IP address of the classifier.
Source IP Mask Length
Specify the mask length of the source IP address.
Destination IP Address
Specify the destination IP address of the classifier.
Destination IP Mask Length
Specify the destination IP mask length of the classifier.