Allied Telesis AT-S101 - Manual (Page 32)

Chapter 2: Basic Switch Parameters
32
4. To create an entry number, type 1 through 8 in the box next to the
Entry number field.
This value appears as the Index value in the Administration table at the
bottom of the page.
5. To create a user name, enter a user name in the box next to the User
Name field.
You can enter a value of up to 12 alphanumeric characters.
6. To add a password for the above user name, enter a password of up
to 12 alphanumeric characters in the box next to the Password field.
7. To confirm the above password, retype the password in the box next
to the Confirm Password field.
8. Click Add to activate your changes on the switch.
9. From the menu on the left side of the page, select Save
Configuration to Flash to save your changes.
Modifying
Administration
Information
To modify the a user name password, perform the following procedure.
1. From the menu on the left side of the page, click the System folder.
The System folder expands.
2. From the System folder, select Administration.
The Administration Page is shown in Figure 8 on page 31.
3. Select the user name that you want to change and click modify.