Allied Telesis AT-S101 - Manual (Page 232)

Appendix A: AT-S101 Management Software Default Settings
232
(Duplex) Mode Auto-Negotiation
Jumbo (frames) Disabled
Flow Control (Full-duplex Mode) Enabled
Back pressure (Half-duplex Mode) Enabled (not adjustable)
Port Trunking
Status Disabled
LACP Port Trunking
System Priority 32768
IGMP Snooping
Status Disabled
IGMP Snooping Age-Out Timer 280 seconds
Port Mirroring
Status Disabled
VLAN
Name Default VLAN
VID 1
Ports All Ports (Untagged)
SNMP
public community
Enabled, Read Only
private community Enabled, Read Write
Quality of Service
Status Disabled
Mappings of IEEE 802.1p Priority
Levels to Egress Port Priority Queues See Table 1 on page 63.
Priority Override Status Disabled
Priority Queue Queue 0
STP and RSTP
Status Disabled
Protocol version RSTP
Table 8. AT-S101 Default Settings (Continued)
Parameter Default Setting