Allied Telesis AT-S101 - Manual (Page 175)

AT-S101 Management Software User’s Guide
175
Configuring a Destination MAC Filter
To set MAC address in the Destination MAC Filter, perform the following
procedure:
1. From the menu on the left side of the page, select the Security folder.
The Security folder expands.
2. From the Security folder, select Destination MAC Filter.
The Destination MAC Filter Page is shown in Figure 53.
Figure 53. Destination MAC Filter Page
3. After you have configured a destination MAC address, the Destination
MAC Filter Page is updated with the MAC address. See Figure 54.
Figure 54. Updated Destination MAC Filter Page