Allied Telesis AT-S101 - Manual (Page 168)

Chapter 14: 802.1x Port-based Network Access Control
168
authentication port in the single operating mode. Choose a value
between 0 and 4,000. Then click Apply. There is no default value. For
more information, see “Guest VLANs” on page 164.
5. When you are finished configuring the parameters, click Apply at the
bottom of the 802.1x Configuration page.
6. If the port control setting is Auto and you want to return the EAPOL
machine state on the port to the initialized state, select Yes for the
Initialize parameter and click Apply.
7. If the port control setting is Auto and you want the node connected to
the port to reauthenticate with the RADIUS server, select Yes for the
Re-auth Initialize parameter and click Apply.
8. From the menu on the left side of the page, select Save
Configuration to Flash to save your changes.