Allied Telesis AT-S101 - Manual (Page 214)

Chapter 20: Management Software Updates
214
The Firmware Upgrade via TFTP page is shown in Figure 66.
Figure 66. Firmware Upgrade via TFTP Page
The Image/Version Date shows the current version and date of
software installed on the switch.
3. Change the following parameters as necessary:
TFTP Server IP
The IP address of the TFTP server from which you are downloading
the new software.
Image File Name
The name of the AT-S101 file you are downloading.
Retry Count:
The number of times the firmware upgrade is retried. The default
number of tries is 5. The range is 1 through 20.
4. Click Apply.
The software immediately begins to download onto the switch. This
process takes a few minutes. After the software download is complete,
the switch initializes the software and reboots. You will lose your web
browser connection to the switch during the reboot process.