Allied Telesis AT-S101 - Manual (Page 216)

Chapter 20: Management Software Updates
216
4. Change the following parameters as necessary:
Select File:
Enter the path of the firmware file or click the Browse button and
select the filename.
5. Select one of the following:
Upload
Select this button to upload a configuration file onto the switch.
The software immediately begins to upload from or download onto the
switch.
Download
Select this button to download a configuration file from the switch onto
your PC.
The following window is displayed. See Figure 68.
Figure 68. File Download with HTTP
6. Click Save to download the configuration file onto the switch.
The Microsoft “Save As” window is displayed.
7. Save the file in the appropriate directory.