Allied Telesis AT-S101 - Manual (Page 109)

AT-S101 Management Software User’s Guide
109
Deleting a Host Table Entry
Use the following procedure to delete a Host Table entry.
1. From the menu on the left side of the page, select the SNMP folder.
The SNMP folder expands.
2. From the SNMP folder, select Host Table.
The Host Table Page is shown in Figure 32 on page 107.
3. To delete an entry in the host table, click delete next to the entry in the
table that you want to remove.
The Host Table entry is removed from the table. No confirmation
message is displayed.
4. From the menu on the left side of the page, select Save Configuration
to Flash to save your changes.