Allied Telesis AT-S101 - Manual (Page 117)

AT-S101 Management Software User’s Guide
117
Note
The Multicast Group Address table contains MAC addresses of
nodes that are members of multicast groups. To set a Multicast
Group Address, see “Setting a Static Multicast Address” on
page 129.
5. After you have configured a Group MAC Address on the Static
Multicast Address Page, the IGMP Snooping Page is updated with
the Multicast Group address. See Figure 35.
Figure 35. IGMP Snooping Page with MAC Address
6. To display more information about the multicast group address, click
on the MAC address.
The IGMP - Group Members Page is displayed. See Figure 36 on
page 117.
Figure 36. IGMP Snooping —Group Members Page