Figure 6 switch admin module, 6 switch admin module – HP Brocade 4Gb SAN Switch for HP BladeSystem c-Class User Manual
Page 42
42
Managing your fabrics, switches, and ports
Managing fabrics, switches, and ports using
Advanced Web Tools
You can perform most of management tasks described in this chapter through the Switch Admin module.
Information in the Switch Admin module is retrieved from the selected switch.
Click the Admin button in the Switch View to access the Switch Admin module.
shows the Switch
Admin module.
Figure 6
Switch Admin module
When you click the Admin button from the Switch View, you must log in as an admin to launch the Switch
Admin module. Information displayed in the Switch Admin module is not updated automatically by
Advanced Web Tools. To update the information displayed in the Switch Admin module, see ”
CAUTION:
Any changes you make in the Switch Admin module are in a buffered environment and are
not applied to the switch until you save the changes. (The exception to this is the License tab, where
changes are applied immediately and there is no Apply button.) If you close the Switch Admin module
without saving your changes, your changes are lost. To save the buffered changes you make in the Switch
Admin module to the switch, click Apply before closing the module or before switching to another tab.
Some of the management tasks for the Core Switch 2/64 and SAN Director 2/128 are performed
through the Hi Avail module. This module and the associated tasks are described in ”
You can also use telnet commands to perform management tasks. Refer to ”
on page 43 for information on how to launch a telnet window through Advanced Web Tools.