HP Brocade 4Gb SAN Switch for HP BladeSystem c-Class User Manual
Page 20
20
Introducing Advanced Web Tools
• device-based (SAN Switch 4/32 and Brocade 4Gb SAN Switch for HP p-Class BladeSystem
only)
• exchanged-based (SAN Switch 4/32 and Brocade 4Gb SAN Switch for HP p-Class
BladeSystem only)
For the SAN Switch 4/32 and Brocade 4Gb SAN Switch for HP p-Class BladeSystem, the
exchange-based routing policy is the default.
•
On page 58, in the section “To view FSPF routing,” replace this sentence:
For HP StorageWorks SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, and SAN Switch
4/32, click the FSPF Route category in the navigation tree.
With the following:
For HP StorageWorks SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, SAN Switch
4/32, and Brocade 4Gb SAN Switch for HP p-Class BladeSystem, click the FSPF Route category in
the navigation tree.
•
On page 59, in the section “To configure a static route,” replace this sentence:
For HP StorageWorks SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, and SAN Switch
4/32 switches, click the Static Route category in the navigation tree and then click Add.
With the following:
For HP StorageWorks SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, SAN Switch
4/32, and Brocade 4Gb SAN Switch for HP p-Class BladeSystem, click the Static Route category in
the navigation tree and then click Add.
•
On page 60, in the section “To configure the link cost for a port,” replace this sentence:
For HP StorageWorks SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, and SAN Switch
4/32 switches, select Link Cost in the navigation tree.
With the following:
For HP StorageWorks SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, SAN Switch
4/32, and Brocade 4Gb SAN Switch for HP p-Class BladeSystem, select Link Cost in the
navigation tree.
•
On page 65, in the section “To disable or reenable trunking mode on a port,” replace this sentence:
For HP StorageWorks SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, and SAN Switch
4/32, proceed directly to the next step.
With the following:
For HP StorageWorks SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, SAN Switch
4/32 and Brocade 4Gb SAN Switch for HP p-Class BladeSystem, proceed directly to the next step.
•
On page 69, in the section “Creating and Maintaining User-Defined Accounts,” replace the first
sentence:
In addition to the four default accounts—root, factory, admin, and user—Fabric OS supports up to
15 user-defined accounts in each logical switch (domain).
With the following:
In addition to the five default accounts—root, factory, admin, switchAdmin, and user—Fabric OS
supports up to 15 user-defined accounts in each logical switch (domain).
•
On page 69, in the section “Creating and Maintaining User-Defined Accounts,” replace the second
paragraph: