HP Brocade 4Gb SAN Switch for HP BladeSystem c-Class - Manual (Page 78)

78 Managing your fabrics, switches, and ports
Removing a RADIUS server
Use the following procedure to remove a RADIUS server:
1. Launch the Switch Admin module as described on page 43 .
2. Click the AAA Service tab.
3. Select a RADIUS server from the RADIUS Configuration list.
4. Click Remove.
If there is no RADIUS server configured, the Remove button is disabled. You cannot remove the only
RADIUS server if the RADIUS service is the primary AAA service.
The RADIUS server is not deleted until you apply the changes from the AAA Services tab.
5. Click Apply in the AAA Services tab.
A confirmation appears, warning you that you are about to remove the selected RADIUS server.
6. Click Yes in the confirmation.