HP Brocade 4Gb SAN Switch for HP BladeSystem c-Class - Manual (Page 14)

14 Introducing Advanced Web Tools
The login dialog box is displayed.
4) Type the user name of an account and the admin, switchAdmin, or user role.
5) Type the password.
6) Click OK.
• On page 1-3:
After this sentence:
The SAN Switch 2/8V Switch Explorer view (shown in Figure 4 on page 29) is a good example
showing how the SAN Switch 2/16V, SAN Switch 2/32, and SAN Switch 4/32 Switch Explorer
views look.
Add this sentence:
The Switch Explorer (shown in Figure 4 on page 29) is a good example of how the Brocade 4Gb
SAN Switch for HP p-Class BladeSystem Switch Explorer view looks.
• On page 26:
Replace this paragraph:
In Figure 2 , the Core Switch 2/64 has two domains; there is a separate set of Switch View buttons
for each logical switch. When only one domain exists, there is one shared set of Switch View
buttons, as displayed in Figure 3 . The active CP in the Core Switch 2/64 is labeled with a small
arrow at the bottom of the CP display.
With the following:
In Figure 2 , the Core Switch 2/64 director has two domains; however, only one domain is
displayed. You can view and manage only one domain at a time, even though both domains are
enclosed in the same chassis. To manage the other domain, you must log in to it separately. The
active CP in the Core Switch 2/64 director is labeled with a small arrow at the bottom of the CP
display.
• On page 16:
After this sentence:
Figure 2 on page 27 shows an example of the Web Tools Switch Explorer for a Core Switch
2/64.
Add the following:
This format is similar to the Switch Explorer format for the Brocade 4Gb SAN Switch for HP
p-Class BladeSystem.
• On page 31, in the section “Switch Information View”:
Replace this sentence:
For all other switch types (HP StorageWorks SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch
2/32, and SAN Switch 4/32), the Switch Information View is located beneath the graphic
representation of the switch.