HP Brocade 4Gb SAN Switch for HP BladeSystem c-Class - Manual (Page 122)

122 Performance monitoring administration
3. To display detailed port throughput utilization rates for particular ports only:
a. Right-click anywhere in the graph.
b. Select Select Ports.
The setup dialog box opens ( Figure 42 ). The title of the dialog box varies, depending on the type
of graph you are customizing, but the layout of the dialog box is the same. Figure 42 shows an
example of the setup dialog box for the Switch Throughput Utilization graph.
Figure 42 Switch Throughput Utilization setup dialog box
c. Double-click the domain icon to expand the slot/port list.
For the Core Switch 2/64 and the SAN Director 2/128, click the + signs to expand the ports
under each slot, as shown in Figure 42 .
d. Click the port you want to monitor in the graph in the Port Selection List. Use Shift+click and
Ctrl+click to select multiple ports.
e. Click Add to move the selected ports to the Selected Ports list.
f. Optional: Click ADD ALL Ports to add all of the ports in the Port Selection List to the Selected Ports
list.
g. Optional: Click Search to launch the Search Port Selection List dialog, from which you can search
for all E_Ports, all F_Ports, or all port names with a defined string. Select the ports you want to add
and click Search in the Search Port Selection List dialog box.
h. Click Apply in the Switch Throughput Utilization Setup dialog box.
Only the selected ports are displayed in the graph.