HP Brocade 4Gb SAN Switch for HP BladeSystem c-Class User Manual
Page 23
Fabric OS 5.0.0 Advanced Web Tools user guide
23
Director 2/128, SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, and SAN Switch 4/32
cannot be members of an FA zone.
With the following:
FA zones can be administered using Fabric OS 5.x; however, switches or directors running Fabric
OS v5.x cannot be members of a Fabric Assist zone. HP StorageWorks Core Switch 2/64, SAN
Director 2/128, SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, SAN Switch 4/32,
and Brocade 4Gb SAN Switch for HP p-Class BladeSystem cannot be members of a FA zone.
•
On page 119, replace this sentence:
For the SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, and SAN Switch 4/32, slot
numbers are not identified.
With the following:
For the SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, SAN Switch 4/32, and Brocade
4Gb SAN Switch for HP p-Class BladeSystem, slot numbers are not identified.
•
On page 121 in the section “To create a basic performance monitor graph,” replace this sentence:
For HP StorageWorks SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, and SAN Switch
4/32, you need only type a port number.
With the following:
For HP StorageWorks SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, SAN Switch
4/32, and Brocade 4Gb SAN Switch for HP p-Class BladeSystem, you need type only a port
number.
•
On page 121, in the section “To customize basic Performance Monitoring graphs,” replace this
sentence:
For the HP StorageWorks SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, and SAN
Switch 4/32, proceed to step 3.
With the following:
For HP StorageWorks SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, SAN Switch
4/32, and Brocade 4Gb SAN Switch for HP p-Class BladeSystem, proceed to step 3.
•
On page 125, in step 5, replace this sentence:
For the SAN Switch 4/32, you can enter up to eight LUN masks.
With the following:
For the SAN Switch 4/32 and Brocade 4Gb SAN Switch for HP p-Class BladeSystem, you can
enter up to eight LUN masks.
•
On page 125, in the section “Creating an AL_PA error graph,” replace this sentence:
The AL_PA Error graph is not supported on the SAN Switch 4/32.
With the following:
The AL_PA Error graph is not supported on the SAN Switch 4/32 or on the Brocade 4Gb SAN
Switch for HP p-Class BladeSystem.
•
On page 130, in the section “To launch the Fabric Watch module,” delete the following:
The login dialog box opens.
3) Enter the user name of an account with the admin role.