HP Brocade 4Gb SAN Switch for HP BladeSystem c-Class User Manual
Page 22
22
Introducing Advanced Web Tools
3) Enter the user name of an account with the admin role.
4) Enter the password.
•
On page 90, in the “Displaying port information” section, in the last paragraph, replace this sentence:
For the HP StorageWorks SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, and SAN
Switch 4/32, there are no subtabs for the slots, there are no subtabs for the slots.
With the following:
For HP StorageWorks SAN Switch 2/8V, Switch 2/16V, SAN Switch 2/32, SAN Switch 4/32,
and Brocade 4Gb SAN Switch for HP p-Class BladeSystem, there are no subtabs for the slots.
•
On page 91, in the section “To access the Port Information screen,” replace this sentence:
For the HP StorageWorks SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, and SAN
Switch 4/32, and SAN Switch 4/32 switches, proceed directly to the next step.
With the following:
For HP StorageWorks SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, SAN Switch
4/32, and Brocade 4Gb SAN Switch for HP p-Class BladeSystem, proceed directly to the next
step.
•
On page 93, in the section “Managing zoning with Advanced Web Tools,” delete the following
sentence:
When you click the Zone Admin icon from the Fabric Toolbar, you must log in as an admin user to
launch the Zone Admin module.
And replace it with the following paragraph:
You must be logged in as an admin or switchAdmin to launch the Zone Admin module. If you are
logged in as a switchAdmin, you can access the Zone Admin module in read-only mode only; most
of the zoning operations are disabled in read-only mode.
•
On page 95, in the section “Launching the Zone Administration module,” delete the following:
The login dialog box opens.
3) Enter the user name of an account with the admin role.
4) Enter the password.
•
On page 101, in the section “Managing QuickLoops,” replace this paragraph:
QuickLoop can be administered using Fabric OS 4.x versions; however, switches or directors
running Fabric OS v4.x cannot be members of a QuickLoop. HP StorageWorks Core Switch 2/64,
SAN Director 2/128, SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, and SAN Switch
4/32 cannot be members of a QuickLoop.
With the following:
QuickLoop can be administered using Fabric OS 5.x versions; however, switches or directors
running Fabric OS v5.x cannot be members of a QuickLoop. HP StorageWorks Core Switch 2/64,
SAN Director 2/128, SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, SAN Switch
4/32, and Brocade 4Gb SAN Switch for HP p-Class BladeSystem cannot be members of a
QuickLoop.
•
On page 102, in the section “Managing Fabric Assist Zones,” replace this paragraph:
FA zones can be administered using Fabric OS 4.x; however, switches or directors running Fabric
OS v4.x cannot be members of a Fabric Assist zone. HP StorageWorks Core Switch 2/64, SAN