HP Brocade 4Gb SAN Switch for HP BladeSystem c-Class - Manual (Page 92)

92 Monitoring your fabrics, switches, and ports
1. Select a switch from the Fabric Tree.
The selected switch appears in the Switch view.
2. Click the port icon for which you want to view information.
The Port Information screen opens.
3. This step is switch-specific:
For the Core Switch 2/64 and SAN Director 2/128, click the slot tab that corresponds to the correct
slot for the logical switch.
For the HP StorageWorks SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, and SAN Switch
4/32, proceed directly to the next step.
4. Click the port tab.
5. Optional: To view additional port information, click one of the subtabs for each port: PortStats, SFP, or
Loop.
Displaying swapped port area IDs
Use this procedure to view swapped ports on the switch. You cannot swap ports using Advanced Web
Tools: you can swap ports using the Fabric OS CLI only.
To determine whether a port area ID has been swapped with another switch port:
1. Launch the Switch Admin module as described in ” Launching the Switch Admin module ” on page 43.
2. Click the Ports tab.
3. View the Port (Area ID) column in the Port Settings tab.
For ports that have been swapped, the port number is followed by the area ID, in parentheses.