Configuring the e-mail alert recipient, Figure 48 fabric watch e-mail configuration, 48 fabric watch e-mail configuration – HP Brocade 4Gb SAN Switch for HP BladeSystem c-Class User Manual
Page 136
136 Fabric Watch administration
2.
Click the Switch tab.
3.
Enter your primary domain Name Server IP address in the DNS Server 1 field in the Email
Configuration area (see
).
4.
Enter your secondary domain server IP address in the DNS Server 2 field.
5.
Enter the domain name in the Domain Name field (between 4 and 32 characters).
6.
Click Apply to save the changes.
Configuring the e-mail alert recipient
You can set a different e-mail alert configuration for each class. For example, you can set one e-mail
notification for SFPs and another for E_Ports. Before configuring e-mail alert recipients, you must set up the
e-mail notification recipient’s DNS server and domain name. For more information, see ”
Figure 48
Fabric Watch e-mail configuration
To configure the Email Alert alarm:
1.
Launch the Fabric Watch module as described in ”
To launch the Fabric Watch module:
2.
Click the Email Configuration tab.
3.
Select the Enable or Disable radio button to enable or disable the e-mail alert status.
When you disable e-mail alerts, Fabric Watch does not send e-mail notification even if the e-mail
notification method is assigned to monitored areas.
4.
Type the e-mail address of the recipient in the Recipient Email Address text box.
Messages are sent to this address when e-mail notification is enabled.