HP Brocade 4Gb SAN Switch for HP BladeSystem c-Class - Manual (Page 121)

Fabric OS 5.0.0 Advanced Web Tools user guide 121
2. Select Performance Graphs > Basic Monitoring > Graph Type .
Depending on the type of graph you select, you may be prompted to select a slot or port for which to
create a graph (see Figure 41 ).
Figure 41 Creating a port throughput graph
3. If prompted, drag the port into the Enter/drag slot,port field, or manually enter the slot and port
information in the field, in the format slot,port.
For the Core Switch 2/64 and the SAN Director 2/128, you must select first a slot number and then a
port number. For HP StorageWorks SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, and
SAN Switch 4/32, you need only enter a port number.
4. Click OK.
The graph is displayed in a window in the Performance Monitor module. The following section
explains how to customize some of these graphs.
Customizing basic monitoring graphs
You can customize some of the basic Performance Monitoring graphs to display information for particular
ports. For the Core Switch 2/64 and the SAN Director 2/128, you can also customize these graphs to
display information for a slot.
You can customize the following graphs:
• Switch Throughput Utilization Graph
• Switch Percent Utilization Graph
• Port Snapshot Error Graph
The following procedure assumes that you have already created one of these customizable graphs.
To customize basic Performance Monitoring graphs:
1. Create or access the graph you want to customize. See ” Creating a basic Performance Monitor
graph ” on page 120 for instructions on creating a graph.
2. For the Core Switch 2/64 and the SAN Director 2/128, to display detailed port throughput utilization
rates for each port in a slot, click the arrows next to a slot. Port information for that slot is displayed in
the graph.
For the HP StorageWorks SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, and SAN Switch
4/32, proceed to step 3 .