Figure 44 creating a scsi command graph, Creating an al_pa error graph, Figure 45 creating an al_pa error graph – HP Brocade 4Gb SAN Switch for HP BladeSystem c-Class User Manual
Page 125: 44 creating a scsi command graph, 45 creating an al_pa error graph
Fabric OS 5.0.0 Advanced Web Tools user guide 125
The applicable setup dialog box opens.
shows the SCSI Read/Write on a LUN per port
Setup dialog box.
Figure 44
Creating a SCSI command graph
3.
Navigate to a switch > slot > port in the Slot/Port Selection List.
4.
Click the port from the Slot/Port Selection List and drag it into the Enter/drag slot,port field.
5.
Optional: For the LUN per port graphs, type a LUN number in hexadecimal.
For the SAN Switch 4/32, you can enter up to eight LUN masks.
For all other switches running Fabric OS v4.x, you can enter up to two LUN masks.
For switches running Fabric OS v3.x, you can enter up to three LUN masks.
6.
Click OK.
The selected graph is displayed in the canvas.
Creating an AL_PA error graph
The AL_PA Error graph displays CRC errors for a given port and a given AL_PA. The AL_PA Error graph is
not supported on the SAN Switch 4/32.
To create an AL_PA error graph:
1.
Launch the Performance Monitor module as described on
.
2.
Select Performance Graphs > Advanced Monitoring > ALPA Error.
The AL_PA Error Setup dialog box opens (see
Figure 45
Creating an AL_PA error graph