HP Brocade 4Gb SAN Switch for HP BladeSystem c-Class - Manual (Page 24)

24 Introducing Advanced Web Tools
4) Enter the password.
• On page 129, in Table 11 , “Firmware Download” row, replace this sentence:
SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, and SAN Switch 4/32 switches: loss of
network connectivity is up to 1 minute if POST is disabled.
With the following:
SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, SAN Switch 4/32, and Brocade 4Gb
SAN Switch for HP p-Class BladeSystem: loss of network connectivity is up to 1 minute if POST is
disabled.
• On page 132, in Figure 11 , “Windows Operating Systems” row, replace this sentence:
You might still be able to invoke various features from Switch View, such as Status, Info, Fan Temp,
Power, and Beacon.
With the following:
You might still be able to invoke various features from Switch View, such as Status, Fan Temp,
Power, and Beacon.
Launching Advanced Web Tools
You can launch Advanced Web Tools on any workstation that has a compatible web browser installed.
For a list of web browsers compatible with Fabric OS v4.x, see ” Requirements ” on page 35. Advanced
Web Tools also supports HTTPS protocol, if that protocol is enabled for the switch. For more information
on enabling the HTTPS protocol on your switch, refer to the HP StorageWorks Fabric OS 4.x procedures
user guide.
To launch Advanced Web Tools:
1. Launch the web browser and enter the IP address of the licensed switch in the Location/Address field:
http://123.123.123.123
or
https://123.123.123.123
2. Press Enter.
Advanced Web Tools launches as shown in
Figure 1 .