HP LaserJet 3150 All-in-One Printer series - Manual (Page 68)

66 3 Printing EN
Hints and help
In this section, find answers to commonly asked questions and
suggestions for getting the most out of your HP LaserJet 3150
product. See chapter 8, "Troubleshooting and Maintenance," for a
more complete list of common print quality and usage problems and
solutions.
What If...
I want to use more than one of the HP LaserJet 3150 product
functions at the same time? This product is specifically designed to
allow you to do many tasks simultaneously, such as print while
sending a fax.
Jobs also queue and wait until another job finishes. For example, if a
fax is being received while you are printing, the fax is stored in
memory and then prints automatically after the print job finishes. Or, if
an incoming fax is being printed, you can start sending an outgoing
fax. The outgoing fax is stored in memory and starts transmitting
when the phone line is available. Only in rare instances will the
HP LaserJet 3150 product run out of memory and cancel one job so it
can complete another.
See “Simultaneous tasking features” on page 228 for a complete list
of which features can be used at the same time.
I want to print from MS-DOS? You must print from an MS-DOS
program that runs under Windows. Also, you must use the HP
LaserJet II printer driver (not included). Other HP LaserJet printer
drivers do not work.
A paper jam occurs while printing? Once you have removed the
jam, the HP LaserJet 3150 product, in most cases, reprints the
jammed page and finishes the rest of the job. Once your print job has
finished printing, check to make sure all pages printed.