HP LaserJet 3150 All-in-One Printer series - Manual (Page 168)

166 8 Troubleshooting and Maintenance EN
Resetting the HP LaserJet 3150 product
You may need to reset the HP LaserJet 3150 product if an error
occurs. Resetting the HP LaserJet 3150 product accomplishes the
following:
● Clears all unprinted data from the HP LaserJet 3150 product’s
memory.
● Clears current incoming and outgoing fax jobs.
● Clears current copy jobs.
● Removes some error conditions.
To reset the HP LaserJet 3150 product
Press S TOP /C LEAR and hold it down for seven seconds. The
HP LaserJet 3150 product resets. After resetting, the Ready light will
be lit and not blinking if no errors are found.
If this does not work, unplug the HP LaserJet 3150 product’s power
cord from the power source for 10 seconds, and then replug it in.