Using remote retrieval – HP LaserJet 3150 All-in-One Printer series User Manual
Page 41
EN
Receiving faxes to the product
39
Using remote retrieval
If you are away from your HP LaserJet 3150 product but would like to
retrieve your faxes, you can have them sent to a fax machine at your
present location. To use this feature, your HP LaserJet 3150 product
must be the one receiving faxes (not the computer) and must be set to
Automatic mode.
There are two parts to this procedure: setting up before you leave and
then retrieving the faxes once you arrive at the remote location. If
faxes are normally received to memory (not printed), then you do not
need to do the setup procedure.
Note
If this is the first time you have used remote retrieval, you must enable
the feature and set a password. See “Enabling remote retrieval and
setting a password” on page 137.
To set up before leaving
1
If faxes normally are received to memory, you do not need this
procedure.
- Or -
If faxes normally print, go to the next step.
2
Press
E
NTER
/M
ENU
.
3
Use the
<
and
>
keys to select
FAX SETTINGS
and press
E
NTER
/M
ENU
.
4
Use the
<
and
>
keys to select
INCOMING FAXES
and press
E
NTER
/M
ENU
.
5
Use the
<
and
>
keys to select
MEMORY RECEIVE
and press
E
NTER
/M
ENU
.
6
Use the
<
and
>
keys to select
YES
and press
E
NTER
/M
ENU
.
7
Press
S
TOP
/C
LEAR
to exit the Menu settings.
Hint
You can have the HP LaserJet 3150 product notify your when faxes
arrive and then retrieve them while at a remote location. To do this, see
“Using pager notification” on page 42 to enable that feature before you
leave.