HP LaserJet 3150 All-in-One Printer series - Manual (Page 157)

EN Adjusting general defaults 155
Changing the default copy size
The default copy size is the size to which copies are normally reduced
or enlarged. If you keep the factory default size set to 100 percent, all
copies will be the same size as the original document. You probably
will not need to change this setting and should leave it set to 100
percent.
Note If you only want to change the copy size for the job you are currently
copying, see “Reducing or enlarging copies” on page 74.
To change the default copy size
1 Press E NTER /M ENU .
2 Use the < and > keys to select USER DEFAULTS and press
E NTER /M ENU .
3 Use the < and > keys to select COPY SIZE and press
E NTER /M ENU .
4 Use the < and > keys to select the option for how you want to
reduce or enlarge copies normally. You can choose MANUAL (IN
%) , LEGAL TO LETTER , LETTER TO A4 , A4 TO LETTER , or 100% .
5 Press E NTER /M ENU to save your selection.
6 If you chose MANUAL (IN %) , type the percent by which you
normally want copies reduced or enlarged and press
E NTER /M ENU .
7 Press S TOP /C LEAR to exit the Menu settings.