HP LaserJet 3150 All-in-One Printer series - Manual (Page 24)

22 2 Faxing EN
Resolution options
Use this table to determine which resolution setting to choose for your
fax. Note that each increase in quality lengthens transmission time.
Choose this resolution: For this result:
Standard
(203 by 98 dpi) Standard quality for words.
● Use this setting when speed is more important
than quality. This is the fastest of the resolution
settings.
● All fax machines can receive at this quality.
● Words have better quality than graphics or
photos.
Fine
(203 by 196 dpi) Higher quality for words.
● Use this setting for good all-around quality.
● Most fax machines can receive at this setting.
If they cannot, they will receive at Standard.
● Words have better quality than graphics or
photos.
Superfine
(300 by 300 dpi) Best quality for words.
● Words have better quality than graphics or
photos.
● Only a few fax machines receive at this mode.
If they cannot, they will receive at the highest
supported resolution.
● Documents with this resolution are not
scanned before the fax number connects.
● Faxes to a group, faxes to be polled, or delayed
faxes cannot use this setting.
Photo
(halftone images scan up to
300 by 300 dpi) Best quality for graphics and photos.
● Use this setting when the quality of graphics
and photos in the document is more important
than the quality of words.
● Only a few fax machines receive at this mode.
If they cannot, they will receive at the highest
supported resolution.
● The document will be scanned as a halftone
image (which simulates shades of gray) at up
to 300 by 300 dpi.
● This is the longest of the transmission times.
● Documents with this resolution are not
scanned before the fax number connects.
● Faxes to a group, faxes to be polled, or delayed
faxes cannot use this setting.