HP LaserJet 3150 All-in-One Printer series - Manual (Page 113)

EN Setting send fax options 111
Programming speed-dial codes from the
control panel
You can program any 225 of the 250 total codes with speed-dials.
Speed-dial codes using numbers 1-10 are also associated with the
corresponding one-touch key on the control panel.
To create speed-dial codes (and one-touch keys) containing fax
numbers, use "To program speed-dial codes for fax numbers" below.
If your computer is directly connected to the product and you have a
compatible e-mail program installed, you can also create speed-dial
codes (and one-touch keys) containing e-mail addresses. Use “To
program speed-dial codes for e-mail addresses” on page 112.
Hint Speed-dial codes (and one-touch keys) can be more easily
programmed from the software. See “Programming speed-dial codes
from the software” on page 115. Programming one-touch keys and
speed-dial codes from the software will not add numbers to or alter
numbers in the PC Fax Phone Books.
To program speed-dial codes for fax numbers
1 Press E NTER /M ENU .
2 Use the < and > keys to select FAX SETTINGS and press
E NTER /M ENU .
3 Press E NTER /M ENU to select SPEED DIALS .
4 Press E NTER /M ENU to select SPEED DIAL SETUP .
5 Enter the number of the speed-dial code you want to associate
with this fax number and press
E NTER /M ENU . Choosing 1-10 also
associates the fax number with the corresponding one-touch key.
6 Enter the fax number. Include any pauses or other needed
numbers, such as an area code, an access code for numbers
outside a PBX system (usually a 9 or 0), or a long distance prefix.
7 Press E NTER /M ENU .
8 Enter a name for the fax number. To do so, repeatedly press the
numeric key for the letter you need until the letter appears. (See
“Using dialing characters” on page 107 for a list of characters.)
For example, if the first letter you need is a “C,” press
2
repeatedly until a C appears. Press > to go to the next space.