HP LaserJet 3150 All-in-One Printer series - Manual (Page 117)

EN Setting send fax options 115
Programming speed-dial codes from the
software
Using this procedure, you can use the software to program up to 225
speed-dial codes with fax numbers you use often. If the product is
directly connected to your computer using a parallel cable and the
computer has a compatible e-mail program, you can also program
speed-dial codes that contain e-mail addresses.
Speed-dial codes can be assigned to any 225 of the 250 total codes,
and fax numbers (or e-mail addresses) you associate with speed-dial
codes 1-10 will also be associated with the corresponding one-touch
key. After you assign speed-dial codes using this procedure, the
codes are downloaded to and stored in the product. Assigning codes
using this procedure in no way affects the PC Fax Phone Books.
To program speed-dial codes (and one-touch keys)
from the software
1 Open the JetSuite software and click the Configure icon.
2 Click the Modify device configuration settings for your
HP LaserJet 3150 icon.
3 Click Speed Dial Configuration.
4 In the # field in the Speed Dial Information box, type the number
of the speed-dial code (1 through 250) you want to use and press
T AB .
5 In the Name field, type a name for this fax number or e-mail
address.
6 In the Fax number or Email Address field, type a fax number or
e-mail address. In order for you to assign an e-mail address, your
computer must be directly connected to the product and you must
have a compatible e-mail program installed.
7 Click OK to add this one-touch key or speed-dial code.
For instructions on using a one-touch key or speed-dial code
containing a fax number, see “Sending faxes to one recipient” on
page 25. For instructions on using a one-touch key or speed-dial
code containing an e-mail address, see “E-mailing documents from
the product” on page 99.