HP LaserJet 3150 All-in-One Printer series - Manual (Page 42)

40 2 Faxing EN
To retrieve faxes while at a remote location
1 When you arrive at the remote location, pick up the handset of the
fax machine, a telephone connected to the fax machine, or any
telephone and dial your fax number.
2 Wait for the fax tones. When you hear a pause between them,
press
* .
3 After you hear three beeps, press # , enter your four-digit
password, and press ** .
4 If your HP LaserJet 3150 product has not received any faxes, it
generates a series of short, rapid tones and disconnects from the
line.
- Or -
If the HP LaserJet 3150 product does not disconnect, there are
faxes in memory. Do one of the following:
• If you are calling from a handset or telephone connected to the
fax machine where you want the faxes sent, go to step 5.
• If you are at a telephone not connected to the fax machine or
want the faxes sent to a different fax machine, enter that fax
number and press
## . (If your HP LaserJet 3150 product is on
a PBX system, enter the access code, usually a 9 or 0, with
the fax number.)
5 Select one of the following options:
• Press 0# to print the faxes at your current location and then
delete them from your HP LaserJet 3150 product’s memory.
• Press 1# to print the faxes at your current location and save
them in your HP LaserJet 3150 product’s memory.
• Press 2# to print the faxes only at your HP LaserJet 3150
product and delete them from memory.
6 If you are calling from the fax machine where you want the faxes
sent, wait until you hear three beeps, press
S TART , and hang up.
- Or -
If you entered a fax number in step 5, wait until you hear three
beeps and hang up.
Your HP LaserJet 3150 product implements the option you chose.