HP LaserJet 3150 All-in-One Printer series - Manual (Page 256)

254 C Changing Parallel Port Modes EN
AST
www.ast.com
1 While your computer is booting, follow the directions on the
screen: “To enter Setup, press CTRL-ALT-ESC.” (If you have a
486, it may say to press CTRL-ALT-DEL).
2 Follow the legend on how to scroll through the options.
3 When you reach the Parallel Port Mode option, choose ECP if it
is a choice. Otherwise choose Enhanced. (ECP mode will
provide the best printing and scanning performance.)
4 Follow the legend directions for saving and exiting.
Compaq
www.compaq.com
Pentium computers should already have the parallel port mode in
ECP or bi-directional mode. Refer to your computer’s documentation
for instructions on checking the parallel port mode. If you have a 486,
you may need an external ECP port card.
Dell
www.dell.com
1 While your PC is booting, follow the directions on the screen: “To
enter Setup, press DEL.” (If you have a 486, it may say to press
F2).
2 Press ALT + P and choose Parallel Mode.
3 There should be a list of modes available. If ECP is a choice,
choose ECP. Otherwise, choose Bi-directional. (ECP mode will
provide the best printing and scanning performance.)
4 Follow the legend directions for saving and exiting.