HP NonStop G-Series - Manual (Page 265)

Common Attribute Values
Service State
This attribute appears in the list of attributes only when attention or service is required.
Meaning Value
The object is functioning properly. This value appears only in the Problem Summary dialog box. OK
The resource requires operator attention. This condition sometimes generates an alarm, and the
component that requires attention is colored yellow in the tree pane and in the Physical and
ServerNet views of the view pane. Attention Required
The resource requires service. This condition generates an alarm, and the component that requires
service is colored red in the tree pane and in the Physical and ServerNet views of the view pane. Service Required
Fabric State
Meaning Value
At least one of the processors on the local node can communicate with at least one processor on one of the
remote nodes. Up
No processor on the local node can communicate with a processor on any remote node. This value is the default.
NOTE: The Fabric state for a one-node ServerNet cluster is Down because communication with processors in
remote nodes is not possible.
Down
Configuration Tag
This table shows the supported configuration tags for each topology:
OSM and Guided Procedures Display Value Supported Configuration Tags* Topology
0x11111 0x11111 (manufacturing default) N/A
Max 8 nodes, nodes 1-8 (0x10000) 0x10000 Star
Max 16 nodes, nodes 1-8 (0x10000) 0x10000 Split-star
Max 16 nodes, nodes 9-16 (0x10001) 0x10001
Max 24 nodes, nodes 1-8 (0x10002) 0x10002 Tri-star
Max 24 nodes, nodes 9-16 (0x10003) 0x10003
Max 24 nodes, nodes 17-24 (0x10004) 0x10004
Port Connectivity Status
Valid Only For Value
Reset
Link dead (Loss of optical signal)
Link dead (Transceiver absent)
No link alive
Link alive, port disabled
Link alive, port disabled, neighbor check in progress
Link alive, port disabled, neighbor check complete
Zone-to-Zone Interconnect and Layer-to-Layer Interconnect ports Link alive, port disabled, neighbor check failed (Not
connected)
Switch-to-Node Interconnect ports Link alive, port disabled, neighbor check failed (Connected
to switch)
Common Attribute Values 265