Switch logic board, Attributes, Physical – HP NonStop G-Series User Manual
Page 254: Logical, Firmware, Configuration
Switch Logic Board
A circuit board that provides switching logic for the
. The logic board connects to a panel on the front of
the 6780 switch for operator and maintenance functions.
Location in OSM tree: External ServerNet Fabric > Switch Group > Switch Module > Switch Logic Board
Example: Switch Logic Board (1020.1.14)
Attributes
Switch Logic Board
Displayed in the Attributes tab and Attributes dialog box only if the value is something
other than OK.
Service State
Physical
The hardware revision of the switch logic board.
Hardware Revision
The state of the fault LED on the switch logic board.
Values: On, Off, Blinking
LED State
The part number of the switch logic board.
Part Number
The track ID of the switch logic board.
Track ID
Logical
The reason for last reset operation.
Values:
Hardware initiated
Soft reset button pressed
Front panel button pressed
Second Level Watchdog timer expiration
Third Level Watchdog timer expiration
Firmware initiated
Soft reset command issued
Hard reset command issued
Last Reset Type
The date and time of the last processor soft reset.
Time of Last Soft Reset
The date and time of the last processor hard reset.
Time of Last Hard Reset
The state of the switch firmware.
Values: Active, Updating, In Test, Initializing, Unknown
Firmware State
Firmware
The VPROC of the firmware currently loaded on the switch logic board.
Version
The full path name of the default firmware file on the server.
Default File Name
The version of the firmware in the default firmware file.
Default File Version
The differences, if any, between the current and default firmware versions.
Compare State
Configuration
A parameter used by SCF and the guided procedures that allows SANMAN to select
an appropriate switch configuration block (SCB) from the switch configuration library.
The selected SCB is subsequently loaded on the specified switch. The configuration
tag determines the position of the cluster switch in the topology and the ServerNet
node numbers supported by the cluster switch.
Example: 9721
Configuration Tag
The VPROC of the configuration currently loaded on the switch logic board.
Version
The full path name of the default configuration file on the server.
Default File Name
The version of the configuration in the default configuration file.
Default File Version
254
Cluster Resources