HP NonStop G-Series - Manual (Page 153)

Maintenance Switch
An Ethernet switch that allows the OSM console to communicate with the Maintenance Entity (ME) in the ServerNet
switch board .
Location in OSM Tree: System > Monitored Service LAN Devices > Maintenance Switch
Example: Maintenance Switch SRSLAN
Attributes
Maintenance Switch
Displayed in the Attributes tab and Attributes dialog box only if the value is something
other than OK.
Values
Service State
Logical
Configurable contact name set in the web interface (launched by the Link to Web
Interface action) by selecting Configuration tab > System Info > System Contact.
Contact
Indicates whether the switch is up or down. Device Status
The version of the firmware running on the switch. Firmware Revision
The IP address of the switch. IP Address
Lists the port numbers of ports on the switch that have lines connected. Lines Connected
Lists the port numbers of ports on the switch that have been disconnected (since
the OSM server has been running). Lines Disconnected
Configurable location identifier set in the web interface (launched by the Link to Web
Interface action) by selecting Configuration tab > System Info > System Location.
Location
The media access control (MAC) address of the switch. MAC Address
The part number of the component that was assigned in manufacturing. Part Number
The version of the startup bootcode for the switch. ROM Version
A unique identification number assigned to each switch in manufacturing. Serial Number
Actions
Link to Web Interface
Opens a Web interface that provides detailed device configuration and information for the maintenance switch.
Rediscover
Causes OSM to refresh and reanalyze the object. Refresh refers to OSM updating the attribute values displayed in
the OSM Service Connection interface. Reanalyze refers to the running of OSM incident analysis, which checks EMS
event messages and creates alarms in OSM if certain conditions exist.
Stop Monitoring
Stops OSM from monitoring the maintenance switch.
Maintenance Switch 153