HP NonStop G-Series - Manual (Page 158)

Set Physical Location
Allows you to assign these Physical Location attributes for the module:
•
Rack Name is a user-defined name for the rack containing the module. You can enter up to eight alphanumeric
characters.
•
Rack Offset allows you to display a numerical value representing the location of the module within the rack. A
valid integer (from 1 to 42) must be specified when performing the Set Physical Location action, or the action
will fail.
•
Locator is an optional text string to help identify the physical location of the module. It must contain alphanumeric
characters only.
•
This parameter, used for DC-powered Telco systems only, allows you to specify a system alarm panel (SAP)
identifier, which is then displayed in OSM by the Alarm Panel Identifier attribute for this hardware resource. An
system alarm panel (SAP) provides visual alarm indicators and relays for generating three levels of alarms to
alert the customer to the severity of a hardware error in the system. By default, systems are configured with one
SAP located in the CIA for the group 11 I/O enclosure. You might need to set the Alarm Panel Identifier if the
system has multiple SAPs, you add equipment to a system, or you move equipment from one system to another.
158 System Resources