HP NonStop G-Series - Manual (Page 108)

Start Volume
Starts all paths for both the primary and mirror drives of this volume unless they are in a Hard Down state. Disk paths
in a Hard Down state require a reset action first (either
Reset Disk , Reset Primary Path , or Reset Backup Path as
appropriate).
Stop Backup Path
Terminates the backup path to the disk. When the Stop action finishes, the path is in a Down state. If the disk drive
is currently in use, a dialog box warns you and asks whether or not you want to continue with the action.
Stop Disk
Terminates all paths for this disk drive. When the Stop action finishes, the paths are in a Down state. If the disk drive
is currently in use, a dialog box warns you and asks whether or not you want to continue with the action.
Stop Primary Path
Terminates the primary path to the disk. When the Stop action finishes, the path is in a Down state. If the disk drive
is currently in use, a dialog box warns you and asks whether or not you want to continue with the action.
Stop Volume
Terminates all paths for the primary and mirror drives of this volume. When the Stop action finishes, the paths are in
a Down state.
Switch Process Pair
Switches the primary and backup disk I/O processes.
Switch to Backup Path
Switches processing from the primary to the backup path.
Switch to Primary Path
Switches processing from the backup to the primary path.
Test Verify
Runs the power-on self-test for the disk and tests the internal circuitry of the drive.
Verify Physical Connectivity
Verifies connectivity to the disk on a particular path.
108 System Resources