HP NonStop G-Series - Manual (Page 185)

SEB
The ServerNet expansion boards (SEBs) and cables allow processors in one enclosure to communicate with processors
in another enclosure. Each SEB CRU provides either the ServerNet X fabric or the ServerNet Y fabric for a group.
Location in OSM Tree: System > Group > Module > SEB
Slot Location: SEBs must be located in slots 51 and 52 of processor enclosures (service side).
Example: SEB (1.1.52)
Attributes
SEB
Displayed in the Attributes tab and Attributes dialog box only if the value is something
other than OK.
Values
Service State
Physical
A code that identifies the generation of the component. Hardware revision codes are
used for tracking components. Hardware Revision
Identifies the manufacturer of the component. Manufacturer
The part number of the component that was assigned in manufacturing. Use part
numbers for identifying and ordering parts. Part Number
Whether the component is powered on. Values Power State
A unique serial number that identifies the component. Track IDs are used for tracking
components. Track ID
Logical
Which, if any, ServerNet router ports on this CRU are disabled. OSM actions to
disable or enable a ServerNet port are performed as directed by OSM alarm repair
actions. Disabled ServerNet Ports
Actions
Disable ServerNet Port
Disables the specified ServerNet port on this CRU. Perform this action only as directed by OSM alarm repair actions.
Parameter: Port Number
Enable ServerNet Port
Enables the specified ServerNet port on this CRU. Perform this action only as directed by OSM alarm repair actions.
Parameter: Port Number
Replace
Launches the Replace SEB guided procedure, which provides step-by-step instructions for replacing the SEB CRU.
SEB 185