HP NonStop G-Series - Manual (Page 245)

Remote 6770 Switch
The nodes connected directly to one switch see the other switches as remote switches. Although local and remote
switches are the same from a hardware standpoint, less information and no actions are available for the remote switch.
To perform actions or get additional information on a remote switch, establish a service connection from one of the
nodes that connects directly to that switch.
Location in OSM tree: External ServerNet Fabric > Remote Switch
The last part of the switch name indicates the fabric and position of the switch in the topology.
Example: Remote Switch $ZZSMN.X2
Attributes
Remote Switch
Displayed in the Attributes tab and Attributes dialog box only if the value is something
other than OK.
Values
Service State
Physical
A parameter used by SCF and the guided procedures that allows SANMAN to select
an appropriate switch configuration block (SCB) from the M6770CL switch
configuration library. The selected SCB is subsequently loaded on the specified
switch. The configuration tag determines the position of the cluster switch in the
topology and the ServerNet node numbers supported by the cluster switch.
Values
Example: Max 24 nodes, nodes 1-8
Configuration Tag
A unique, read-only number stored in nonvolatile memory (SEEPROM) on a ServerNet
II switch. The Globally Unique ID can be used programmatically to identify the switch. GUID
Whether the switch is configured for operation on the X fabric or the Y fabric.
Values: X, Y, or Clear Fabric Setting
Verification that the switch is installed and responding.
Values: Present, Absent, Unknown Presence
The version of the configuration file currently loaded on the switch.
Example: 1_5 Configuration Version
The version of the firmware currently loaded on the switch.
Example: 3_0_23 Firmware Version
Actions
None.
Remote 6770 Switch 245